Usable for installation at inlets and outlets of chambers and basins.Suitable for throttling and regulating purposes.Sealing on 4- faces. For on- and off- seating pressure. Low operation forces.
Usable for installation in channels and outlets. Suitable for throttling and regulating purposes. Sealing on 3- faces. For on- and off- seating pressure. Low operation forces.
Multi rake bar screen is a mechanical cleaning screen which is installed in the inlet works of treatment plants, pumping stations and water inlet structures to capture solid materials which otherwise would be harmful to following processes and to the downstream equipment.
Sludge thickening is the process of increasing solids content of sludges from primary and/or secondary settling
tanks. The process serves to reduce the size of the subsequent sludge dewatering steps.
Rectangular tanks are commonly used for sand removal in wastewater treatment plants, both aerated and nonaerated systems. A scraper bridge removes sand, which settles to the tank bottom.
Settling process, which is one of the most commonly used unit operation, sometimes is accomplished in rectangular shaped tanks. In such cases, sludge settled to the bottom must be conveyed to the sludge hopper located at the inlet part of the tank.
is used as a preliminary filtration device to remove large debris, aquatic plants, and other floating materials from incoming water before it enters the treatment stages. This step prevents clogging and damage to downstream equipment, such as pumps, pipelines, and finer filtration systems.
Screw conveyors are designed to transfer different material including solids, water and sludge. In treatment plants, they are commonly used for conveying of screening material, grit and dewatered sludge.
A Mechanical Bar Screen is an automated screening system installed in the headworks of wastewater treatment plants, pump stations, or water intake structures. It continuously removes coarse solids from the influent stream to protect downstream processes and equipment from clogging and damage.
A Sand Silo is a storage and discharge unit designed to temporarily hold and discharge dewatered sand and grit separated during the grit removal process in wastewater treatment plants. Sand silos are installed downstream of grit classifiers or grit washers and serve as an intermediate holding unit before final disposal.
A water treatment system component used in clarifier tanks for efficient solids
removal. Ideal for municipal and industrial wastewater treatment applications.
Primarily used in water intake systems to remove coarse solids and debris, preventing
damage to pumps and other equipment.
Used for mixing chemicals, water, and sludge in water treatment plants.
Essential for processes like coagulation, flocculation, and chemical dosing
Used in water treatment plants for lifting and transporting heavy equipment, sludge,
or other materials. Essential for maintenance tasks and operational efficiency.
The company’s aim was to enter the Egyptian market for water treatment and the steel industry, including steel buildings, factories, and others.